Search results

The paper aims to develop a mathematical model for delamination and surface roughness during end milling by using response surface methodology (RSM) and to determine how the input parameters (cutting speed, depth of cut, helix angle and feed rate) influence the output response (delamination and surface roughness) in machining of hybrid glass fibre reinforced plastic (GFRP; Abaca and Glass) composite using solid carbide end mill cutter.

Four-factor, three-level Taguchi orthogonal array design in RSM is used to carry out the experimental investigation. The “Design Expert 8.0” is used to analyse the data collected graphically. Analysis of variance is carried out to validate the model and for determining the most significant parameter.

The feed rate is the cutting parameter which has greater influence on delamination (88.39 per cent), and cutting speed is the cutting parameter which has greater influence on surface roughness (53.42 per cent) for hybrid GFRP composite materials. Both surface roughness and delamination increase as feed rate increases, which means that the composite damage is larger for higher feed rates.

Effect of milling of hybrid GFRP composite on delamination and surface roughness with various helix angles of solid carbide end mill has not been analysed yet using RSM.

This paper aims to develop a mathematical model for delamination during end milling by using response surface methodology (RSM) and to determine how the input parameters (cutting speed, depth of cut and feed rate) influence the output response (delamination) in machining of hybrid glass fibre reinforced plastic (GFRP; abaca and glass) composite using solid carbide end mill cutter.

Three factors, three levels Box–Behnken design in RSM is used to carry out the experimental investigation. Shop microscope Mitutoyo TM-500 is used to measure the width of maximum damage of the machined hybrid GFRP composites. The “Design Expert 8.0” is used to analyse the data collected graphically. Analysis of variance is carried out to validate the model and for determining the most significant parameter.

The RSM is used to predict the input factors influencing the delamination on the machined surfaces of hybrid GFRP composite at different cutting conditions with the chosen range of 95 per cent confidence intervals. Analysis on the influences of the entire individual input machining parameters on the delamination has been carried out using RSM.

Effect of milling of hybrid GFRP composite on delamination with solid carbide end mill has not been analysed yet using RSM.

This paper aims to develop a mathematical model for analysing surface roughness during end milling by using response surface methodology (RSM) and to determine how the input parameters (cutting speed, depth of cut and feed rate) influence the output parameter (surface roughness) in the machining of hybrid glass fibre reinforced plastic (GFRP; Abaca and Glass) composite by using solid carbide end mill cutter.

Three factors and a three-level Box–Behnken design in RSM were used to carry out the experimental investigation. Handysurf E-35A was used to measure the surface roughness of the machined hybrid GFRP composites. The “Design Expert 8.0” was used to analyse the data collected graphically. Analysis of variance was carried out to validate the model and determine the most significant parameter.

The response surface model was used to predict the input factors influencing the surface roughness of the machined surfaces of hybrid GFRP composite at different cutting conditions with a chosen range of 95 per cent confidence intervals. Analysis of the influences of the entire individual input machining parameters on the surface roughness carried out using RSM.

The effect of the milling of hybrid GFRP composite on the surface roughness with solid carbide end mill by using RSM has not been analysed yet.

The Constitution of India guarantees freedom of speech and expression to its citizens. This freedom is not absolute and the State can impose reasonable restrictions. Of late, certain incidents have shown this freedom to be under threat. The case highlights some of such events. It makes the readers think about the importance of this right, reasonableness of restrictions, and the measures needed to protect it.

As a solution to these crises, bringing back the feminine sensitivity can become a welcome change. The Bishnoi community, in particular, propagated Eco-feminism for the cause of the environment. Therefore, this paper aims to study the community in detail along with suggesting a Bishnoi Environment Protection Model as an Indian indigenous solution to the global environmental problems.

The method of obtaining information was a detailed questionnaire-based interview along with multiple focus group discussions. The interviews were conducted with the women who belong to the Bishnoi community and who are actively taking forward the ethos of their community. Interviews were conducted across a span of different villages to cover a different portion of the Bishnoi population. Adding to this, multiple focus group discussions took place in the temple, wild-life protection center, Self-help group women's households, community meetings.

Religion and science are complementary and supplementary to each other in the true sense. It would be good to recall what the greatest scientist had said “Science without religion is blind and religion without science is lame”.

The research limitation of this paper is that it is a field study-based research wherein the research findings are the outcomes of personal interviews with the village community people. The limitation, therefore, lies in the simplicity of the research arguments put forward in this paper. The implication of this research would be to challenge the dominant research paradigms in the field of Eco-feminism and Climate Change and bring grass root narratives to the forefront.

The practical implication of this research paper is that in Environment related policy solutions, rural women should be appointed as consultants of advisors in the high profile decision-making policy groups. It would make the process very democratic and rooted in ground-level solutions. If the Bishnoi community women of India are given their due regard they would eventually play significant roles in the decision-making groups at the national and international levels.

Other than having a policy implication, this research paper has a social implication too. The community narratives which have been hidden for so long in the remote villages of India will come to the forefront and help as a guiding force.

This paper recommends that India should propagate its culturally-rooted principles such as the one in Jambhoji's commandments. India should strongly put these normative values in the international organizations and contribute to a new epistemology of knowledge in the counter effect of existing ones. This would make a paradigm shift at the level of the knowledge-power in which the developed nations manipulate the rest of the world. The new terminologies, concepts, agendas, goals should be formulated by deriving the knowledge from age-old communities in India. The people of these communities have even given their lives for the protection of the environment.

A critical issue in the design of routing protocols for wireless sensor networks is the efficient utilization of resources such as scarce bandwidth and limited energy supply. Many routing schemes proposed in the literature try to minimize the energy consumed in routing or maximize the lifetime of the sensor network without taking into consideration limited capacities of nodes and wireless links. This can lead to congestion, increased delay, packet losses and ultimately to retransmission of packets, which will waste considerable amount of energy. This paper presents a Minimum‐cost Capacity‐constrained Routing (MCCR) protocol which minimize the total energy consumed in routing while guaranteeing that the total load on each sensor node and on each wireless link does not exceed its capacity. The protocol is derived from polynomial‐time minimum‐cost flow algorithms. Therefore protocol is simple and scalable. The paper improves the routing protocol in (1) to incorporate integrality, node capacity and link capacity constraints. This improved protocol is called Maximum Lifetime Capacity‐constrained Routing (MLCR). The objective of MLCR protocol is to maximize the time until the first battery drains its energy subject to the node capacity and link capacity constraints. A strongly polynomial time algorithm is proposed for a special case of MLCR problem when the energy consumed in transmission by a sensor node is constant. Simulations are performed to analyzed the performance of the proposed protocols.

The purpose of this paper is to study the 14 principles of Edwards Deming and create significant relationships between them. No research has been reported on the implementation of Total Quality Management (TQM) using Deming’s 14 principles. To fill this gap, Interpretive Structural Modeling (ISM) and MICMAC analysis have been developed to understand mutual interactions among variables and find both the dependence and driving power of these variables.

The research paper discusses a blend of practical applications and introduces a theoretical framework. An ISM-based methodology is used to study and examine interactions between identified variables, while MICMAC analysis is used to identify the dependence and driving power.

This research utilizes Deming’s 14 quality principles, with experts from academia and industry consulted to identify contextual relationships among variables. The result shows that the stated principles “take action to accomplish the transformation,” “institute training,” “encourage education to employees” and “institute leadership” are strategic requirements, while “drive out fear,” “break down barrier between staff areas” and “eliminate numerical quotas” are tactical requirements. “Adopt the new philosophy,” “create constancy in improvement of product and service” and “cease dependence on mass inspections” are operational requirements for TQM applications.

An ISM-based quality framework, dependence power and driving power of variables using MICMAC analysis have been recommended to the service and manufacturing industry as a new focus area in the implementation of TQM.

The purpose of this paper is to systematically review the functionalities, safety regulations and product applications of herb Stevia rebaudiana extract. This plant material is embedded with multiple functionalities such as antioxidant, antidiabetics, anti-inflammation and antimicrobial. The regulations released from global authorities are covered to ensure the safety premise of stevia. Besides, the product applications of the extract of aerial parts of the herb S. rebaudiana helps us to recognize its value from commercial side.

Relevant literatures are selected and obtained from main scientific databases such as Google Scholar, Web of Science, PubMed and trade magazines published between 2000 and 2023. The keywords and their possible combinations such as sweetening, antioxidant, antidiabetics, anti-inflammation, safety and product development were used to ensure the preciseness and completeness of literature searching. Major data such as sweetness, total phenolic content and dose together with latter critical conclusions from searched publications were appropriately used and discussed. In this review, approximately 150 scientific literatures were meticulously ordered and analyzed. In applications, it is the first time that sentiment analysis was used to obtain a market assessment of the stevia-containing products.

This review paper helps rearrange the scientific affairs of those stevia extract’s functions like sweetening, antioxidant, antidiabetics and inflammation. Sweetness indexes of steviol glycosides were summarized together for comparison while various in vitro and in vivo approaches were reviewed to quantify those functions’ capacities and to depict the related mechanism. The regulation of steviol glycoside compounds such as rebaudioside A was established by global authorities such as US Food and Drug Administration and Joint FAO/World Health Organization Expert Committee to ensure the safety endorsement before commercialization. Then, this study discussed about the market performance of stevia ingredients or products with the self-developed data analytics. This study also investigated the product development progress of stevia-containing food products in the categories of beverage, bakery, dairy and confectionery. Those stevia-containing food consumer goods can be acceptable by certain consumers.

This review paper precisely presents the evidential information about the stevia’s multiple functionalities with mechanisms and global regulation milestones. To the best of the authors’ knowledge, it is then the first time to probe the stevia-containing products’ market performance through data analytics.

The purpose of this paper is to study the functionality of additively manufactured (AM) parts, mainly depending on their dimensional accuracy and surface finish. However, the products manufactured using AM usually suffer from defects like roughness or uneven surfaces. This paper discusses the various surface quality improvement techniques, including how to reduce surface defects, surface roughness and dimensional accuracy of AM parts.

There are many different types of popular AM methods. Unfortunately, these AM methods are susceptible to different kinds of surface defects in the product. As a result, pre- and postprocessing efforts and control of various AM process parameters are needed to improve the surface quality and reduce surface roughness.

In this paper, the various surface quality improvement methods are categorized based on the type of materials, working principles of AM and types of finishing processes. They have been divided into chemical, thermal, mechanical and hybrid-based categories.

The review has evaluated the possibility of various surface finishing methods for enhancing the surface quality of AM parts. It has also discussed the research perspective of these methods for surface finishing of AM parts at micro- to nanolevel surface roughness and better dimensional accuracy.

This paper represents a comprehensive review of surface quality improvement methods for both metals and polymer-based AM parts.